Detailed Product Description
I. Product Summarize
MJE-Yoke Series Magnetic Particle Yoke is a portable micro magnetic particle flaw detector that uses a yoke to magnetize a work-piece made of ferromagnetic material. It can magnetize various parts and is suitable for oil fields, shipbuilding, internal combustion engine parts, coal mines, machinery, and standard parts, oil pump nozzles, aircraft manufacturing, automotive parts, bridges, chemicals, boiler pressure vessels, railways and other industrial products, surface and near surface defects caused by forging, quenching, welding, fatigue, etc., such as chain rods, crankshafts, bearings, high Flaw detection of complex geometrical work-pieces such as bolts, springs, forgings, petrochemical fittings, valves, blades, gears, rolls, anchor chains and welds.
II. Technical Specifications
|
MJE-Yoke Series Magnetic Particle Flaw Detector |
|
Model |
MJE-220 |
MJE-220 LED |
MJE-220 UVLED |
MJE-12220 |
|
AC / DC |
AC |
AC&DC |
|
Power Supply |
AC 220V 50Hz |
AC 220V 50Hz / DC12V |
|
Working Current |
AC 1.5A |
AC 1.5A / DC 2.0A |
|
Magnetic flux |
110 mw/h |
|
Illuminance |
/ |
15000LUX |
1000 vw/cm2 |
/ |
|
Duty Cycle |
1 second on / 1 second off |
|
Ultraviolet central wavelength |
/ |
365nm |
/ |
|
Magnetic Distance |
50~220mm |
|
Lifting Power |
AC > 5.5 kg |
AC > 5.5 kg / DC > 22 kg |
|
Charging Time |
/ |
8 - 15 hour |
|
Battery Model |
/ |
MF12—7.2H |
|
Battery Life |
/ |
Continuously use more than 5 hours |
|
Battery Weight |
/ |
2.1kg |
|
Yoke Weight |
2.8kg |
3.1kg |
2.8kg |
|
Yoke Size |
208×52×146 mm |
|
Battery Size |
160×100×70 mm |
|
Charge Size |
80×60×40 mm |
|
Packaging Box |
Aluminum alloy packing box |
|
Package Size |
420 x 320 x 170 mm |
500 X 390 X 190 mm |
|
Package Weight |
5.5 kg |
8.4 kg |
III. Standard Configuration
|
Model |
MJE-220 |
MJE-220 LED |
MJE-220 UVLED |
MJE-12220 |
|
AC / DC |
AC |
AC |
AC |
AC&DC |
|
Yoke |
1 |
1 |
1 |
1 |
|
AC Power Cable |
1 |
1 |
1 |
|
|
Battery |
|
|
|
1 |
|
Battery Bag |
|
|
|
1 |
|
Charger |
|
|
|
1 |
|
DC Power Cable |
|
|
|
1 |
|
Built-in LED |
|
1 |
|
|
|
Built-in UVLED |
|
|
1 |
|
|
Operation Manual |
1 |
1 |
1 |
1 |
|
QC Certificate |
1 |
1 |
1 |
1 |
|
Warranty Card |
1 |
1 |
1 |
1 |
|
Aluminum Alloy Packing Box |
1 |
1 |
1 |
1 |
IV. Operation and Precautions
1, Before the use should add a small amount of lubricating oil in the live joint pin parts。
2, Probe pole head should keep good contact with the work-piece rear can push switch, sensor before leaving the artifacts should be timely release the switch. In order to avoid improper operation instrument damage of overheating.
