Detailed Product Description
I.Brief Description
MJE Series miniature magnetic yoke flaw detector is the use of the fork made of ferromagnetic material at hand micro magnetization magnetic sensing device workpiece, for the various parts of magnetization for petroleum, shipbuilding, engine parts, coal , machinery , standard parts, pump nozzle , aircraft manufacturing, automobile parts, building bridges, chemical, boilers and pressure vessels , railway and other industries, making the surface of the forging, quenching, welding, fatigue and near surface defects.Textual string such as rods, crankshaft , bearings, high strength bolts , springs , forgings, petrochemical pipe fittings, valves, blades, gears, rollers, chains, and the geometry of the weld complex parts.
MJE Series miniature magnetic yoke flaw detector with AC , DC , AC- DC Detectors Dual magnetic, power supply DC rechargeable battery, suitable for field operations , and no power supply high voltage can not enter the field of container bridges, pipelines and other field operations, a burden of continuous working time up to 6 hours. AC power source is applied directly ~ 220V input directly support any additional equipment , easy to operate, simple, lightweight, easy to carry, so the instrument is widely used .
II.Technical Specifications
|
Model
|
MJE—12/220
|
|
Power Supply
|
AC220V50Hz or DC12V
|
|
Charging Power
|
AC 220V /50Hz
|
|
Battery
|
MF12—7.2AH
|
|
Working Current
|
AC1.4A/DC1.7A
|
|
Charging Time
|
8~15hrs
|
|
Batterry Life
|
Over 6hrs
|
|
Duty Cycle
|
1min. on/1min. off
|
|
Magnetic Distance
|
50~200mm
|
|
Lifting
Power
|
A C
|
>5.5kg
|
|
D C
|
>26kg
|
|
Weight
|
Yoke
|
3.1kg
|
|
Battery
|
2.9kg
|
|
Dimension
|
Yoke
|
208×52×146mm
|
|
Battery
|
160×70×100mm
|
|
Charger
|
75×50×40mm
|
III.Standard Delivery
|
Yoke
|
1PCS
|
|
Battery Bag
|
1PCS
|
|
Battery
|
1PCS
|
|
Power Cable
|
1PCS
|
|
Fuse
|
2PCS(5A)
|
|
Instruction Manual
|
1PCS
|
|
Instrument Case
|
1PCS
|
IV. Operation and Precautions
1. Before using a small amount of oil should be added in the living parts of the joint pin.
2. Probe pole head should be kept in good contact with the workpiece before pressing the switch, before the probe away from the workpiece should promptly release the switch. Avoid overheating damage caused by improper operation instrument malfunction.
V .Deficiency of charging methods and judgment
1. After the charger (adapter) to connect with the battery charger (adapter) plug into a 220V power outlet, the charger red light, until the red light turns green when charging is completed, the charging time is approximately 12 hours.
2. In the use of battery-powered box, the lifting force decreased or ineffective display specimen should supplement, the charging time is approximately 12 hours.
3. 1 / 0 Switch Function: 0 block for 220V power use, a block for 12V DC power supply.
